Signflute™ Stackable Cubes

24 Hour Production

$19 inc GST Delivery Per Order Australia Wide

*Our fixed shipping price is based on delivering your entire order to one location.

From only
5.10 inc GST each

Get An Instant Quote

How can we get your order to you?

Most Requested

3 x Large (500mm W x 500mm H) Signflute Stackable Cubes

$ 114.80  inc GST
($38.27 GST each)

6 x Medium (400mm W x 400mm H) Signflute Stackable Cubes

$ 120.43  inc GST
($20.07 GST each)

4 x Jumbo (580mm W x 580mm H) Signflute Stackable Cubes

$ 143.43  inc GST
($35.86 GST each)

4 x Small (300mm W x 300mm H) Signflute Stackable Cubes

$ 99.00  inc GST
($24.75 GST each)


About our Signflute™ Stackable Cubes

Our Signflute™ Stackable Cubes are a great low cost way to display your products or business inside an office or shop. Each cube will stack on top of the one below, so you can build a display that is hard to miss! They are digitally printed in full colour on all 4 sides and come flat packed with tabs cut into the corrugated plastic to join the cubes together. We produce our Stackable Cubes using only the best quality Signflute™ Corrugated Plastic to ensure fantastic print quality, durability and lifespan.

  • Available in 4 standard sizes
  • Full colour digital print on 4 sides
  • Top Quality 3mm thick Signflute™ Corrugated Plastic
  • Printed direct to Signflute™ on high quality flatbed printers
  • Notches cut into the bottom of each cube to lock into the cube below
  • Built in self locking system, setup in seconds!
  • Supplied flat packed with each cube folded in half
  • Huge bulk discounts

* Note: Each cube is printed on 1 sheet which is slit to allow the sheet to fold into a cube. This does not allow our usual 1mm bleed so there is a possibility that 1mm of the image on one side of the cube may run over onto the next side

** The fixed shipping price is based on delivering your entire order to one location.


Frequently Asked Questions

  • How long will my Signflute™ Stackable Cubes take to produce?

    We can produce your order in as little as 24 hours after artwork proof sign off:

    < $1101 inc GST - 24 Hours (1 working day) after artwork proof sign off
    < $3301 inc GST - 48 Hours (2 working days) after artwork proof sign off
    < $5501 inc GST - 3 working days after artwork proof sign off and receipt of 30% deposit
    < $11,001 inc GST - 4 working days after artwork proof sign off and receipt of 30% deposit
    < $16,501 inc GST - 5 working days after artwork proof sign off and receipt of 30% deposit
    < $22,001 inc GST - 6 working days after artwork proof sign off and receipt of 30% deposit
    < $27,501 inc GST - 7 working days after artwork proof sign off and receipt of 30% deposit
    < $33,001 inc GST - 8 working days after artwork proof sign off and receipt of 30% deposit
    < $38,501 inc GST - 9 working days after artwork proof sign off and receipt of 30% deposit

  • How are the Signflute™ Stackable Cubes joined together?

    The Signflute™ Stackable Cubes have an interlocking system of tabs and slots which allows you to quickly join them together to form a cube. They also come with 2 slots cut out of the bottom edge of all 4 sides so they can be locked onto the top of the cube below (at a 45 degree angle to the cube below - as shown in the gallery photos).

  • How do the Signflute™ Stackable Cubes fold into a cube?

    The Signflute™ Stackable Cubes​ are made from 3mm thick Signflute™ which is scored (half cut) to allow it to fold. It should be noted that this fold is visible on all 4 edges of the cubes where you will see the white flute. It will appear as a white line running down each corner of the cubes - as you can see in the photos in the gallery.

  • How long will the Signflute™ Stackable Cubes last?

    They are designed for internal use so the Signflute™ and the full colour digital print will last indefinitely. If used outdoors the UV will cause some fading over time.

  • How high can I stack the Signflute™ Stackable Cubes?

    ​The Signflute™ Stackable Cubes can theoretically be stacked as high as you want. We have tested them to a height of around 1500mm and recommend that, if you stack them higher than this, you might use an internal support to ensure they do not topple over.

  • Can I use the Signflute™ Stackable Cubes outdoors?

    ​We only recommend them for use indoors - as they are made from 3mm thick Signflute™ Corrugated Plastic which is a very light product. It would be affected by any wind.

  • What height are the notches on the bottom of the Signflute Stackable Cubes?

    The notches on the bottom of the Signflute Stackable Cubes are the following heights:

    300mm x 300mm size: 15mm notch height

    400mm x 400mm size: 15mm notch height

    500mm x 500mm size: 24mm notch height

    580mm x 580mm size: 28mm notch height

  • I have multiple designs, are there extra setup fees?

    Yes, our price includes the set up cost for 1 design only. If you have multiple designs for the same size you will still get the lower bulk price, however there is a small multiple artwork charge applied for each additional design to cover our extra set up costs. Simply enter the total number of signs required and then the total number of designs into the pricing calculator above - and it will work out an accurate price for you.


Product Reviews

Official Signflute™ Printer

Official Signflute™ Printer

Signflute™ corrugated plastic has been specifically developed to match the demands of the new high speed flatbed printers and inks.

The corrugated plastic material needed to improve at the same rate as the printers to ensure maximum adhesion of the ink to the substrate. The older styles of corrugated plastic were found to be unsuitable for these high tech flatbed printers. They did not have the adhesive properties required - so the ink would just crack and fall off them after a short time!

Our exhaustive testing of many brands of corrugated plastic has shown that Signflute™ corrugated plastic - with it’s smooth surface and very high dyne levels - provides us with the highest quality print results and ink adhesion.

Printing on Australia’s first HP Latex R2000 flatbed printer

​Easy Signs has installed the first HP Latex R2000 flatbed printer in the Southern Hemisphere.

The R2000 flatbed printer is a 6 colour flatbed printer which provides more vibrant colours and sharper print quality than conventional flatbed printers. Using the latest Latex printing process with water based inks, it provides glossier prints with greater scratch resistance and no UV smell!

This product has been chosen to be printed on this new technology printer - and we are sure you will love the high quality product we supply.

Perfect colours every time!

Perfect colours every time!

Our colour management system ensures that all of our printers print the correct colour every time.

As part of our colour management system, we have profiled all of our printers and materials to print to the ISO12647 colour standard. We also implement weekly colour checks on all printers to ensure the accuracy of the colours we are printing for our customers.

This makes sure that your colours are printed perfectly - for every order.

1. Do you require design services?

  • Yes, Please
  • No, Thanks

We will contact you after checkout to discuss the most suitable artwork package for your order

I will be uploading print ready files. (After you checkout you will be taken to a file upload page)

Click here to view our affordable design packages!

What's this?

2. Do you require delivery?

  • Yes
  • No

Signflute™ Stackable Cubes
Signflute™ Stackable Cubes
Continue Shopping Checkout