24 Hour Production
We can produce your order in as little as 24 hours after artwork proof sign off:
< 21 units - 24 hours (1 working day) after artwork proof sign off
< 51 units - 48 hours (2 working days) after artwork proof sign off and receipt of deposit if over $3300 inc GST
< 101 units - 3 working days after artwork proof sign off and receipt of deposit
< 201 units - 4 working days after artwork proof sign off and receipt of deposit
$19 inc GST Delivery Australia Wide
* Our fixed shipping price is based on delivering your entire order to one location.
1 x 6 Foot, Fitted with Four Sides, Table Throw with Full Colour Digitally Printed Graphics
1 x 6 Foot, Loose with Four Sides, Table Throw with Full Colour Digitally Printed Graphics
1 x 4 Foot, Loose with Four Sides, Table Throw with Full Colour Digitally Printed Graphics
1 x 8 Foot, Loose with Four Sides, Table Throw with Full Colour Digitally Printed Graphics
Spice up your display in seconds with our Table Throws. Designed to fit standard 4 ft, 6 ft and 8 ft trestle tables, they’re lightweight, quick to set up and an easy way to turn a plain table into a polished branded display.
Want to stand out even more? Add an optional Table Top Banner to take your branding above the crowd, helping you stay visible and noticed from a distance.
Table Throws have been sized to fit standard trestle table sizes:
Check out our wide range of Event Signage options, designed to perfectly compliment your branding!
** The fixed shipping price is based on delivering your entire order to one location.
We can produce your order in as little as 24 hours after artwork proof sign off:
< 21 units - 24 hours (1 working day) after artwork proof sign off
< 51 units - 48 hours (2 working days) after artwork proof sign off and receipt of deposit if over $3300 inc GST
< 101 units - 3 working days after artwork proof sign off and receipt of deposit
< 201 units - 4 working days after artwork proof sign off and receipt of deposit
Our Table Throws are printed on a high quality 250gsm polyester fabric.
Yes the table throws are printed in full colour so you can choose any colour and design you like - and we can print your logo or image on all sides of the table throws.
The 3 sided Fitted and Loose Table Throws are manufactured with a small “lip” across the top of the open side. This section allows the Table Throws to have two corners to grip onto the back of the table so the Table Throws cannot slide off.
We recommend that you use a steamer to remove any creases from the polyester fabric. It’s also possible to use a warm iron, but it is important that you use an ironing cloth so that the iron does not make contact with the fabric.
We currently don’t offer custom sized Table Throws. The options available on the Round Table Throw and Table Throw pages are the only sizes that we offer.
The Table Throws have been sized to fit the standard trestle tables as follows:
4 foot: 1220mm W x 610mm D x 740mm H
6 foot: 1840mm W x 760mm D x 740mm H
8 foot: 2450mm W x 760mm D x 740mm H
The following are the overall sizes of our Table Throws when they are laid out flat (and as shown on our artwork templates) prior to any sewing. Please note that the back section of the 3 sided Table Throws will be sewn into a pocket (which holds it onto the table). The Fitted Table Throws will also be sewn on each side to allow them to fit the tables. All of these measurements are prior to sewing the back pockets and the fitted sides.
Loose Table Throws:
Fitted Table Throws:
We do not supply trestle tables. The standard size trestle tables are supplied by most major hardware stores.
It is not recommended to use this outdoors due to the wind catching the banner and knocking over the table.
No. Our banners are designed to clamp directly onto a table using two clamps.
Simply slide the fabric over the frame and clamp the frame to the longest side of your table.
The clamps work like standard table clamps. Simply loosen the screw to open, position the clamp on the table, then tighten the screw underneath to secure it in place.
For assembly instructions, you can refer to our Assembly Guide.
A small connector piece slots into both the clamp and pole hardware. Once the screw on the clamp is tightened, it securely holds the connector securely in place.
Get a quote then select a template to customise
Please refresh the page or contact us if the issue persists.
Please refresh the page or contact us if the issue persists.
Product: Table Throws Edit configuration
At Easy Signs, we manufacture our high quality SignWeave™ fabric products in our Sydney manufacturing facility in a super fast 24 hours from your artwork approval!
We know that you want your signs fast! Our in-house printing means you no longer have to wait weeks for your supplier to outsource their fabric products from China.
Our high tech European-made equipment, combined with Easy Signs’ industry leading manufacturing process, allows us to produce your fabric orders faster than any other supplier!
We know it is important to tell your customers that your products are Australian Made, as most Australians (89%) have a preference for Aussie Made Products. That is why Easy Signs have received a third-party accreditation to many of our fabric products, certifying that they are Australian Made.
The Australian Made certification is Australia’s most trusted,
AddressEasy Signs Pty Ltd |
Contact Us
Phone: 1300 972 077 |
Let's get social
facebook.com/myeasysigns |
$19
inc GST
delivery on most products**
Design online with FREE templates
24hr production*
